Vintage Fanes
Moderator: Mods
Vintage Fanes
I have been offered a pair of these.
They have been reconed. I have no idea if these are any good, worth $150 each, be a good match for a Hiwatt.
Comments and suggestions would be very welcome! Thanks
They have been reconed. I have no idea if these are any good, worth $150 each, be a good match for a Hiwatt.
Comments and suggestions would be very welcome! Thanks
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: Vintage Fanes
Would be a good match for a Hiwatt IF the recone job is good. Can you get the cone codes from the seller? The stated price seems high in today's market, for a non-original cone. But, it's your call.buggs wrote: Comments and suggestions would be very welcome!
Dave
Re: Vintage Fanes
<dumbass question>What's a cone code?</dumbass question>
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: Vintage Fanes
Ink stamp or chalk marks on the back side of the cones, indicating part number (and, usually, manufacturer). They can look like this:buggs wrote:<dumbass question>What's a cone code?</dumbass question>
Need to know what cones were used by the reconer. Some parts are better than others.
Dave
Re: Vintage Fanes
WHF5594 which is a Wharfdale recone kit
Does that pass muster?
Does that pass muster?
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: Vintage Fanes
It would in my book, although I'd still lobby for a more discounted price. But, that's just me .buggs wrote: Does that pass muster?
Dave
Re: Vintage Fanes
OK. Then these are definatley an option.
My other thought is a new Fane AXA12 alnico paired with a new medusa 100.
Are you familiar with the new Fanes? New or old?
Thanks
My other thought is a new Fane AXA12 alnico paired with a new medusa 100.
Are you familiar with the new Fanes? New or old?
Thanks
-
- Posts: 45
- Joined: Sun Aug 01, 2010 3:08 am
Re: Vintage Fanes
I run the new Fanes in several cabs and am quite happy with them. I use the the Medusa 100's in the bottom cab of my live rig. My recording cab has two AXA 12's and two Medusa 150's in it. I've also got a bassman cab I loaded with two AXA !2's that sounds awesome, but I haven't played it as much as the Hiwatt cabs yet. Phil
Re: Vintage Fanes
Does the 150W medusa not overpower the AXA? Is the AXA an alnico or ceramic?
Thanks
Thanks
Re: Vintage Fanes
OldSchoolDave wrote:It would in my book, although I'd still lobby for a more discounted price. But, that's just me .buggs wrote: Does that pass muster?
Dave
I may end up getting another recone due to the poor state of the solder tabs. Would weber be a good place to go for that?
-
- Posts: 45
- Joined: Sun Aug 01, 2010 3:08 am
Re: Vintage Fanes
The AXA's are alnico and seem to keep up nicely with the Medusa 150's. I talked to the dealer before I bought them and he assured me that it was a good combination that he uses. Philbuggs wrote:Does the 150W medusa not overpower the AXA? Is the AXA an alnico or ceramic?
Thanks
Re: Vintage Fanes
I've seen the combination before, and looks good. That combo just went on ebay for $400. I was pretty tempted.philmanatee wrote:The AXA's are alnico and seem to keep up nicely with the Medusa 150's. I talked to the dealer before I bought them and he assured me that it was a good combination that he uses. Philbuggs wrote:Does the 150W medusa not overpower the AXA? Is the AXA an alnico or ceramic?
Thanks
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: Vintage Fanes
Not sure if they'll recone vintage Fanes. Drop 'em an email and ask ( http://www.tedweber.com/recone/ ).buggs wrote: I may end up getting another recone due to the poor state of the solder tabs. Would weber be a good place to go for that?
And, let us know what they say!
Dave
-
- Posts: 45
- Joined: Sun Aug 01, 2010 3:08 am
Re: Vintage Fanes
Around the Sound in Seattle has reconed vintage Fanes for me before. Phil
Re: Vintage Fanes
If you dont find nobody ,
I know a good place near Montreal called Belisle acoustics, http://tr.ca/
They've been reconing Fanes since the early 70's ,you can ask for Bruno at 450-691-2584
Louis
I know a good place near Montreal called Belisle acoustics, http://tr.ca/
They've been reconing Fanes since the early 70's ,you can ask for Bruno at 450-691-2584
Louis