vintageHIWATTconvention.com

right, what Dave said.

mine has Kappa Pro LF drivers in it and they nearly tear the cab to bits.
It definitely needs an additional cab to be used with it.

Dr.HI-TONE wrote:It definitely needs an additional cab to be used with it.

Stick a 4122 on top of a 2150 - and then a DR201 - That would be a MAN's stack!!!!!!!

Stu_R wrote:Stick a 4122 on top of a 2150 - and then a DR201 - That would be a MAN's stack!!!!!!!

I don't know, I like the classic double stack: Four 4x12s and a 201.

--mark

mhuss wrote:

Stu_R wrote:Stick a 4122 on top of a 2150 - and then a DR201 - That would be a MAN's stack!!!!!!!

I don't know, I like the classic double stack: Four 4x12s and a 201.

--mark

We'll have to try that this weekend!

Dr.HI-TONE wrote:

mhuss wrote:

Stu_R wrote:Stick a 4122 on top of a 2150 - and then a DR201 - That would be a MAN's stack!!!!!!!

I don't know, I like the classic double stack: Four 4x12s and a 201.

--mark

We'll have to try that this weekend!

If you get the chance I'd love to see a side by side comparison as to the height difference.

Stu, we can try that next month at the VHC.
I will not have any old hiwatt gear this weekend.

Dr.HI-TONE wrote:Stu, we can try that next month at the VHC.
I will not have any old hiwatt gear this weekend.

That would be good, & interesting to see. In my 201's previous life it always ran with a 100w on top too - and between them they ran 4 x 4122 cabs. A friend of mine owns the back-up amp to it & we tried them out in his kitchen once. As you can see I've never had to strike the "rock pose" of reaching up to dime the volume

Damn man, crazy rig.

Rather then starting a new thread...

There's a 76' SE4123 unloaded and kind of beat in my area...

Was thinking of getting it and putting some speakers in it as a project depending on how much he wants for it... do you think it would work well with bass speakers?