Page 2 of 7
Posted: Thu Jan 31, 2008 9:39 pm
by mikhailwatt
Dr.HIWATT wrote:Can we use your graphic for the VintageHIWATTConvention.com Home page?
Sure...
It was just a quickie cut & paste job... "borrowed" the logo from Mark's page and the Townshend stacks from one of the Who sites.
I'll send the "final" product when it's ready.
Posted: Thu Jan 31, 2008 9:41 pm
by Dr.HI-TONE
Excellent!
Posted: Fri Feb 01, 2008 12:54 pm
by OldSchoolDave
mikhailwatt wrote:I'll send the "final" product when it's ready.
Send it over my way, mikhailwatt (I've been doing the modest web stuff to date).
One suggestion: Since this is an International Conference and all
, perhaps USA should follow the Columbus, IN ?
Dave
Posted: Fri Feb 01, 2008 3:15 pm
by mikhailwatt
Please post your suggestions as to what info you think should be included... trying to keep it clean-looking without leaving out any pertinent info.
Dates? USA? Clayton's Basement? (party time, excellent!)
Are we in agreement on the basic concept? Let me know if you'd like to see something a little different. My first draft had a large roman numeral III in the background (3rd annual, wink, wink) but my brother had the great idea to use three HIWATT stacks instead...
Dr. Hiwatt/Mr. Fane suggested (and I think I like it) putting the design on the back, with a HIWATT logo @ the front pocket area.
Posted: Fri Feb 01, 2008 3:24 pm
by Dr.HI-TONE
I like the idea of the big graphic on the back and a smaller logo on the left front pocket area.
For copyright reasons the front shoul probably have the script "vintage" and "convention" sandwiching the HIWATT badge.
the dates could be on the back, or atleast "June 2008, Columbus Indiana USA"
I don't know that I would mention the Basement. If it looks like it will be a big turnout, I will make arrangments for a building at the fairgrounds.
I hope to have the deck and patio rain proof before then.
Posted: Fri Feb 01, 2008 4:05 pm
by Mike B.
Dr.HIWATT wrote:I like the idea of the big graphic on the back and a smaller logo on the left front pocket area.
For copyright reasons the front shoul probably have the script "vintage" and "convention" sandwiching the HIWATT badge.
the dates could be on the back, or atleast "June 2008, Columbus Indiana USA"
I don't know that I would mention the Basement. If it looks like it will be a big turnout, I will make arrangments for a building at the fairgrounds.
I hope to have the deck and patio rain proof before then.
Yes, the big stack picture should go on the back with the smaller one on the left front breast (can we say "breast" here?). By all means include "vintage" and "convention." No mention of "basement."
Here's hopin' we also have pickled herring at the convention!!!
Mike
Posted: Fri Feb 01, 2008 5:42 pm
by OldSchoolDave
I think the concept is GREAT! My only comment was adding the hosting Nation (and, maybe, spelling out Indiana).
Guess we'll have to bulk up before to many more conventions take place and we run out of room to display full stacks
!
Dave
Posted: Fri Feb 01, 2008 7:30 pm
by Dr.HI-TONE
the 3 stacks is a great idea!
I can't wait till June!
Posted: Fri Feb 01, 2008 7:55 pm
by mikhailwatt
Mike B. wrote:(can we say "breast" here?)
I suppose... "man-boob" is off limits, however.
T shirts
Posted: Sat Feb 09, 2008 4:40 am
by HIWATTuser1
How about something on one or both sleeves like a SA-212, and a rear s/n plate with the particulars on it ie: place, date, times, and , of course, DR-405 on it
All cotton black
Also, some medium shirts please
Posted: Sat Feb 09, 2008 5:37 pm
by mikhailwatt
Black, of course! I'll have a few size "M" done as well.
Printing on the sleeves would make them extra spendy... but I really like the s/n plate idea!
Posted: Sat Feb 09, 2008 7:07 pm
by Dr.HI-TONE
I like the serial plate idea too!
maybe in the spaces for model and serial # it could say JUNE and 2008
Posted: Sat Feb 09, 2008 10:49 pm
by mikhailwatt
Dr.HIWATT wrote:maybe in the spaces for model and serial # it could say JUNE and 2008
What do think about having the s/n plate @ the left "breast" area instead of the HIWATT-ish logo?
Posted: Sun Feb 10, 2008 12:15 am
by Dr.HI-TONE
mikhailwatt wrote:Dr.HIWATT wrote:maybe in the spaces for model and serial # it could say JUNE and 2008
What do think about having the s/n plate @ the left "breast" area instead of the HIWATT-ish logo?
I like that!
T shirts
Posted: Sun Feb 10, 2008 3:55 am
by HIWATTuser1
How about the plate on one sleeve with the date, DR 405 etc., and the nice 3-stack graphic on the front, and a large HIWATT logo plate on the back with something cool written underneath ?
