Re: Fane speaker trade
Posted: Tue Jan 27, 2009 9:30 pm
Joe,
The PRII is quite a bit different from the PR that you are used to. Paul Rivera designed these and the Super Champ during his brief stint with Fender. The PRII came with a 12" speaker, usually an Eminence for Fender, but an EV 12F was an option.
So going with a 12" is the easiest route here.
DA,
I would try an 8 ohm Eminence Tonker. They are very neutral sounding and will not distort when driven by the PRII. They are usually pretty cheap on ebay.
The PRII is quite a bit different from the PR that you are used to. Paul Rivera designed these and the Super Champ during his brief stint with Fender. The PRII came with a 12" speaker, usually an Eminence for Fender, but an EV 12F was an option.
So going with a 12" is the easiest route here.
DA,
I would try an 8 ohm Eminence Tonker. They are very neutral sounding and will not distort when driven by the PRII. They are usually pretty cheap on ebay.
Didn't see his original post on it being a PR II. I was wondering why you kept mentioning it.