Looking for a nice '70s Hiwatt 4 x 12!

List your HIWATT / Fane equipment here. BUYER BEWARE! This site does not investigate / moderate / warranty any gear deals.

Moderator: Mods

Thornybank
Posts: 9
Joined: Wed Feb 18, 2009 7:18 pm

Re: Looking for a nice '70s Hiwatt 4 x 12!

Post by Thornybank »

Did you note who you used and what they quoted?

I'll get me ruler oot....
...but holding a 4x while I stand on teh bathroom scales...?

I'll need someone else to read the dial!
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: Looking for a nice '70s Hiwatt 4 x 12!

Post by mikhailwatt »

Thornybank wrote:I'll need someone else to read the dial!
Figure about 130 lbs. shipping weight. This includes a double-thickness cardboard box, packing foam, and a piece of masonite board to protect the grille. And a whole roll of gaffers tape. :lol:
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: Looking for a nice '70s Hiwatt 4 x 12!

Post by OldSchoolDave »

I quoted DHL, FedEx, UPS and DB/Schenker/BAXGlobal. All were in the $500+ US range to ship a 4x12 cab from the UK to MeenaSOHta, USA :shock: . Slow boat is fine, but that doesn't seem to be an option with those fellas.

I was figuring a box 34" x 34" x 16" weighing in at 120 pounds. I think that tripped a dimensional limit on one of the above, so I requoted with 32" x 32" x 14".

Anyway, it'd be wonderful to locate a reliable, economical shipper 'cause there's lots of good stuff across that pond and the dollar is (currently) strong!

regards,
Dave
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: Looking for a nice '70s Hiwatt 4 x 12!

Post by mikhailwatt »

OldSchoolDave wrote:so I requoted with 32" x 32" x 14".
Doesn't leave much room for bulletproofing. :wink:
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: Looking for a nice '70s Hiwatt 4 x 12!

Post by OldSchoolDave »

mikhailwatt wrote:
OldSchoolDave wrote:so I requoted with 32" x 32" x 14".
Doesn't leave much room for bulletproofing. :wink:
Yeah, I know. I was hoping it wouldn't come down to that particular shipper...(it didn't - they were all too expensive).

Dave
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
Post Reply