2 cabs and a 103 TGP
Moderator: Mods
- guitar_tod77
- Posts: 105
- Joined: Sat Feb 20, 2010 10:08 pm
2 cabs and a 103 TGP
"I have terrible hearing trouble. I have unwittingly helped to invent and refine a type of music that makes its principal proponents deaf." ~PT
- Dr.HI-TONE
- Site Admin
- Posts: 2675
- Joined: Wed Nov 14, 2007 8:51 pm
- Location: HIWATT Valley
Re: 2 cabs and a 103 TGP
That is our buddy Zells.
Nice gear! Bad timing for me or I would be all over it!
Nice gear! Bad timing for me or I would be all over it!
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: 2 cabs and a 103 TGP
Oh really? In that case, he should have advertised them as "Direct from the Vintage Hiwatt Convention" .Dr.HIWATT wrote:That is our buddy Zells.
For those keeping score at home, we ran those cabs through our Speaker Shootout and there are no issues with them. That DR103 is from the right era (love the feel of those large diameter RS pots) and would be a nice acquisition for someone in the market.
Dave
Re: 2 cabs and a 103 TGP
Yep, they're mine. One cab or amp needs to go to a new home. The 400 watter is not for sale, however.
- mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: 2 cabs and a 103 TGP
That SE4123 is tempting... I "need" another so as to have a pair of them.
However, I've become quite enamored with "THE SOUND" of a '4122 and '4123 together of late.
However, I've become quite enamored with "THE SOUND" of a '4122 and '4123 together of late.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
Re: 2 cabs and a 103 TGP
I agree that the SE4122 + SE4123 cab setup is a great combination.mikhailwatt wrote:That SE4123 is tempting... I "need" another so as to have a pair of them.
However, I've become quite enamored with "THE SOUND" of a '4122 and '4123 together of late.
Which Fane drivers are loaded in your SE4123? There were several models used in these cabs: cast frame 122231, stamped frame 122231, 125114, 125155, and 125161...others?
- mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: 2 cabs and a 103 TGP
My main SE4123 is a mongrel: '75 cab with (3) cast frame 122231s from '72/'73, plus (1) stamped frame '231 from '76.Zells wrote:I agree that the SE4122 + SE4123 cab setup is a great combination.
Which Fane drivers are loaded in your SE4123? There were several models used in these cabs: cast frame 122231, stamped frame 122231, 125114, 125155, and 125161...others?
My other SE4123 is a well-traveled '78 rear-loader with 125114 Fanes, 3 of which appear to be recones. Big magnets, different tone.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
Re: 2 cabs and a 103 TGP
Cool cabs. I suppose that my SE4123 with all stamped frame 122231 drivers would add a little more variety to your palette of tone options if you chose to obtain it.
- mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: 2 cabs and a 103 TGP
Yeah... haha. I'm kinda runnin' outta storage space as it is with those two plus a pair of early '70s SE4122s. I think I'm good for now.Zells wrote:Cool cabs. I suppose that my SE4123 with all stamped frame 122231 drivers would add a little more variety to your palette of tone options if you chose to obtain it.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
Re: 2 cabs and a 103 TGP
Haha...space is limited for me too. My living room is crowded with amps, cabs, guitars, pedals, etc.
- mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: 2 cabs and a 103 TGP
My office has morphed into an electronics lab/amp storage room... I've taken to leaving a pair of cabs semi-permanently in the back of my SUV - easier on the ol' back, more space in the house!Zells wrote:Haha...space is limited for me too. My living room is crowded with amps, cabs, guitars, pedals, etc.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing