some advise please
Moderator: Mods
some advise please
I have a dr103 hiwatt ap amp serial# 1504 (hylight) and cabinet se4123 serial# 2865 from the 70's. Can anyone tell me about this? Is this considered vintage? or is it just another remake. Any input would be appreciated. By your posts, you all seem pretty knowledgable. Thanks. Tony
Re: some advise please
If it says Hylight on the back, then it's an original. Clayton, Dave, Mark, and others are the experts, and they can tell you all about your amp and cab from the serial numbers.
Re: some advise please
Hi.tmonz wrote:I have a dr103 hiwatt ap amp serial# 1504 (hylight) and cabinet se4123 serial# 2865 from the 70's. Can anyone tell me about this? Is this considered vintage? or is it just another remake. Any input would be appreciated. By your posts, you all seem pretty knowledgable. Thanks. Tony
They were both made in the New Malden workshop,or to put it another way,my garage.
![Wink :wink:](./images/smilies/icon_wink.gif)
Buster.
- Dr.HI-TONE
- Site Admin
- Posts: 2675
- Joined: Wed Nov 14, 2007 8:51 pm
- Location: HIWATT Valley
Re: some advise please
Hi Tony,
That is the real deal! From early 1971 most likely. Yes, it is considered Vintage. If in good condition they are Very Nice amps!!!
The cabs is probably a 1971 vintage as well and also if in good condition then very nice!
Can you post pictures?
If you ever want to sell it let me know!!!!![Laughing :lol:](./images/smilies/icon_lol.gif)
That is the real deal! From early 1971 most likely. Yes, it is considered Vintage. If in good condition they are Very Nice amps!!!
The cabs is probably a 1971 vintage as well and also if in good condition then very nice!
Can you post pictures?
If you ever want to sell it let me know!!!!
![Laughing :lol:](./images/smilies/icon_lol.gif)
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: some advise please
Ahem! You do mean, let US know, rightDr.HIWATT wrote: If you ever want to sell it let me know!!!!
![Wink ;)](./images/smilies/icon_wink.gif)
Welcome, Tony. Please post pictures of that rig, if you can.
regards
Dave
Re: some advise please
fellas, thanks so much for your input. the equipment has been sitting for many years so it needs some work. tubes, electrical, etc. can you point me in the right direction as to who does this kind of work. or if someone wants to buy it as is, i will consider all fairoffers. i'm not sure what to ask for a fixer upper. i will put up pics in my next post as soon as i can upload them. my email is tmonz@yahoo.com
- Dr.HI-TONE
- Site Admin
- Posts: 2675
- Joined: Wed Nov 14, 2007 8:51 pm
- Location: HIWATT Valley
Re: some advise please
1971 is my vintage too!!!
eagerly awaiting pics!
-Clayton
eagerly awaiting pics!
-Clayton
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: some advise please
Where do you live? That would be a factor in both answers.tmonz wrote: can you point me in the right direction as to who does this kind of work. or if someone wants to buy it as is, i will consider all fairoffers.
Also, you may wish to edit your post to split up your email address (something like myname AT yahoo DOT com). This is, after all, a public forum and spiders can gather unprotected email addresses.
Suffering from spam overload,
Dave
- OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: some advise please
PuppyDr.HIWATT wrote:1971 is my vintage too!!!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Dave
- mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: some advise please
Go easy on the youngster, he has a "condition".OldSchoolDave wrote:Ahem! You do mean, let US know, right?
![Wink :wink:](./images/smilies/icon_wink.gif)
I like that statement.buster wrote:or to put it another way,my garage.
![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
I've been looking for a "fixer-upper" so if you do decide to part with it - and Dr. HIWATT hasn't already pulled his Jedi mind-trick on you - please shoot me a PM. Thanks!
Mike
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
Re: some advise please
I'm sure there is not a person registered on this BB who would not be willing to take those off your hands as is, I know I wouldn't mind! ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-lffish133
Re: some advise please
hello again people. im still working on how to upload the pics to the site. computers and i are not a heavenly match.i think i decided to restore the amp. i'm in new york. can anyone point me in the direction of anyone who can do the work on my amp. any advise would be appreciated. i was just a young kid musician when i bought the thing and i have ignorantly undervalued it..until recently, i didn't know what i had. go figure.
- Dr.HI-TONE
- Site Admin
- Posts: 2675
- Joined: Wed Nov 14, 2007 8:51 pm
- Location: HIWATT Valley
Re: some advise please
I can restore it or Mark Huss in the Philly area might be interested in doing it as well.
-Clayton
-Clayton
Re: some advise please
Yes, I've been doing a few Hiwatt repairs/restorations recently. Are you in NYC? I could meet you halfway -- somewhere off the NJTP. And perhaps if we come to an agreement, we wouldn't have to travel a second time!
--mark
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
--mark