Hiwatt Bias Trimpot?

HIWATT amps from the Hylight Electronics era

Moderator: Mods

Post Reply
sproul08
Posts: 2
Joined: Fri Sep 26, 2008 8:42 pm

Hiwatt Bias Trimpot?

Post by sproul08 »

I need to install a bias trimpot in my 77 DR103. Anyone know where I can get one and maybe a diagram for how to wire it?
Top
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: Hiwatt Bias Trimpot?

Post by Dr.HI-TONE »

Hi, I have seen your posts on other forums and you state that you are not good at soldering. Working on a tube amp is dangerous and learning to solder in a HIWATT is not a good idea.

Take your amp and this to a tech.

http://mhuss.com/Hiwatt/Schematics/BiasCkts2.gif

You and your amp will survive. :D
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
Top
raffau
Posts: 43
Joined: Mon Dec 29, 2008 7:43 pm
Location: Switzerland

Re: Hiwatt Bias Trimpot?

Post by raffau »

...take a look here...

viewtopic.php?f=5&t=165&st=0&sk=t&sd=a& ... t=75#p1511
Top
Post Reply

Return to “Hylight era Amps”