Page 1 of 1
watch out for this thing....
Posted: Tue Oct 06, 2009 8:25 pm
by Dr.HI-TONE
http://cgi.ebay.co.uk/ORIGINAL-1970s-Hi ... 286.c0.m14
"original HIWATT"
Yikes!
a converted sound city.
mg control panel
Re: watch out for this thing....
Posted: Tue Oct 06, 2009 9:09 pm
by OldSchoolDave
Dr.HIWATT wrote:
"original HIWATT"
So, for the record, were ANY Hylight Hiwatt
heads made with "Reverberation"?
I'm surprised they didn't peel off that label.
Dave
Re: watch out for this thing....
Posted: Tue Oct 06, 2009 9:38 pm
by Dr.HI-TONE
not to my knowledge.
Re: watch out for this thing....
Posted: Tue Oct 06, 2009 11:56 pm
by Zells
Watch out for this butchered DR103, too
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWAX:IT
Looking at it makes my head hurt. I'm not sure what's worse...the addition of coolings fans or the removal of one of the 'Brill' input jacks.
Re: watch out for this thing....
Posted: Wed Oct 07, 2009 12:30 pm
by Dr.HI-TONE
I had been talking to that guy for a couple months, waiting on pics and waiting on pics. That is a crying shame! Where do you draw the line between "fixxer upper" and spare parts?
Re: watch out for this thing....
Posted: Wed Oct 07, 2009 11:01 pm
by Zells
I also would like to see detailed pics of the wiring especially behind the inputs. Some of the damage may be reversible.
Re: watch out for this thing....
Posted: Thu Oct 08, 2009 11:33 am
by mhuss
Almost everything is reversible. Heck, you could cut and glue wood plugs into those fan holes and recover the box.
It's just a question of how much time and money you want to spend.
--mark