The original head cab was looking a bit tired and tatty:
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRa-1.jpg)
I'm not a fan of dirt and dust, so I acquired a few new parts from our helpful friends at VHR, broke out the elbow grease and went to work.
Here's the chassis after a good cleaning:
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRb-1.jpg)
Retubed with JJECC803s, GE JAN 12AT7, and JJE34Ls, installed new filter caps, and everything is looking shiny and clean:
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRc-1.jpg)
Everything checked, biased, and into the cab:
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRd-1.jpg)
With the back panel attached:
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRe-1.jpg)
Once again, VHR came through in providing the vynide used for my custom head cab, and a big THANK YOU goes out to them!
![Image](http://i259.photobucket.com/albums/hh285/tabreaux/DRf-1.jpg)