Introduce yourself

News and announcements pertaining to this Discussion Board in general.

Moderator: Mods

User avatar
guitar_tod77
Posts: 105
Joined: Sat Feb 20, 2010 10:08 pm

Re: Introduce yourself

Post by guitar_tod77 »

you see "W H O" across the bottom... they could be from the band "O H M"

8)

kidding. cool amps. welcome to the forum. good luck with whatever happens with them.
"I have terrible hearing trouble. I have unwittingly helped to invent and refine a type of music that makes its principal proponents deaf." ~PT
GrahamC
Posts: 5
Joined: Fri Jan 04, 2013 7:37 am
Location: Hampshire, UK

Re: Introduce yourself

Post by GrahamC »

guitar_tod77 wrote:you see "W H O" across the bottom... they could be from the band "O H M"

8)

kidding. cool amps. welcome to the forum. good luck with whatever happens with them.
Ah, so it really reads "111 ohm". That makes much more sense :lol:
Stu_R
Posts: 61
Joined: Sat Aug 18, 2012 2:31 pm
Location: NW England, UK
Contact:

Re: Introduce yourself

Post by Stu_R »

It may well be that you'd have to sell them to someone in the USA to get top dollar for them. There's a whole lot of love for WHO gear over there & far more venues where unknown bands can use gear of that power. I know a guy who was looking for a 200w slave a couple of years ago, but I believe is now down-sizing due to back ache; but where there was one there'll be others.
IME you'd be better off having them over-hauled before selling to increase value, it shouldn't cost much. My Hiwatt 200 was 18 years in a damp store & was still good to go for quite a while when I first got it. The caps are the critical thing, if you can get good close-up pics of the ends where the connections are you'll get a good diagnosis off the guys on here. See my pics halfway down Pp1 of this thread for comparison viewtopic.php?f=2&t=1610
I've been quoted £80 to have them replaced.
On a forum I use NoizyBoyz PA Hire and Live Entertainment Services, of Christchurch, Dorset, have been highly recommended more than once but I've no personal knowledge. Though I can endorse the Dr's opinion expressed re the one you found on Ebay.
GrahamC
Posts: 5
Joined: Fri Jan 04, 2013 7:37 am
Location: Hampshire, UK

Re: Introduce yourself

Post by GrahamC »

Thanks Stu, I understand what you're saying about the US/UK markets. In some respects I'd rather they stayed in the country, and certainly the hassle and expense of shipping them to the States doesn't appeal, but it's clear there are many passionate enthusiasts (of Hiwatt and the WHO) over there and primarily I want them to go to someone who WANTS them (rather than someone who can see a profit in them).

In the next few days I'll be taking more photos, and if I can sort out some suitable leads I'll try powering them up.
Stu_R
Posts: 61
Joined: Sat Aug 18, 2012 2:31 pm
Location: NW England, UK
Contact:

Re: Introduce yourself

Post by Stu_R »

GrahamC wrote:Thanks Stu, I understand what you're saying about the US/UK markets. In some respects I'd rather they stayed in the country, and certainly the hassle and expense of shipping them to the States doesn't appeal

In the next few days I'll be taking more photos, and if I can sort out some suitable leads I'll try powering them up.
I helped a mate of mine sell one of Dave Hill's (Slade) Hiwatt 200 to a guy in New York about 4 years ago. It was double boxed with about 6 inch of foam between the two boxes. The US guy organised a FedEx pickup & it all worked great. (though strangely one of the mains lamps on the front was broken in transit & was replaced by an Ebay purchase).

Seriously - if they've not been used for so long I wouldn't dream of just powering them up. A tech would do that with a Variac to control how much power went into it. If one of the old capacitors blows you'll have a very gunky amp to clean up before you do anything else.

Bulgin leads are fairly hard top come by now - on the grounds that they're not legal - but do often appear on Ebay at around £20+.
GrahamC
Posts: 5
Joined: Fri Jan 04, 2013 7:37 am
Location: Hampshire, UK

Re: Introduce yourself

Post by GrahamC »

Stu_R wrote:...

Seriously - if they've not been used for so long I wouldn't dream of just powering them up. A tech would do that with a Variac to control how much power went into it. If one of the old capacitors blows you'll have a very gunky amp to clean up before you do anything else.

Bulgin leads are fairly hard top come by now - on the grounds that they're not legal - but do often appear on Ebay at around £20+.
You're right, I hadn't really thought that through. I'll hold off plugging them in for now. I have got a pair of Bulgin leads for them, didn't realise they were so rare. Maybe I should sell the leads separately? :lol:
User avatar
hohohiwatter
Posts: 132
Joined: Tue Jan 19, 2010 3:36 pm
Location: Wales, uk

Re: Introduce yourself

Post by hohohiwatter »

i've seen a lot of pics with WHO stencilled on them that look exactly like that so i believe them to be original. the who did own a lot of hiwatts over the years, couldve been for the bass rig or the onstage monitor rig maybe?
U CANT BEAT A DR103 THRU AN SE4122 ON FULL TITS! BREAKOUT THE DEFAID!
Little Lucid Moments
Posts: 1
Joined: Mon Jan 07, 2013 10:46 am

Re: Introduce yourself

Post by Little Lucid Moments »

Hi everyone!!!
I've been reading this forum a few weeks to get info, thanks to all!!
My mane is Rober, I live in Basque Country (Spain) and own a ´74 DR103 from a week (ebay).
http://imgur.com/a/XlK1w


My relationship with HIWATT has started badly because I broked it in 10 minutes , just when I was checking it before taking it to the technicianI , I turned up the volume (60%), the amp melted a fuse and when I replace it, but now no sound (maybe a EL34 and some resistance¿?¿?)
Yesterday I received a set of caps(hi-tone), because I have to change them. In a few days it'll take to repair (re-cap, new power tubes...)
I hope to write soon talking about how good it sounds
sorry for my English
User avatar
mhuss
Site Admin
Posts: 1440
Joined: Thu Nov 15, 2007 5:40 am

Re: Introduce yourself

Post by mhuss »

Welcome! We hope your new old amp issues are sorted out soon.

--mark
User avatar
bikehomero
Posts: 40
Joined: Fri Jan 25, 2013 8:16 pm

Re: Introduce yourself

Post by bikehomero »

Hello, my name is Jürgen. I live in Germany, my amp is a 1977 Custom 50. Found lots of usefull informations here the last few weeks. As i entered yesterday the forum first time as a member got directliy fantastic support from Clayton. Thank you again!

Here is my amp (will take better fotos in the near future to introduce him ar the amps area):
Attachments
Foto0797_50.jpg
Foto0797_50.jpg (139.94 KiB) Viewed 4633 times
User avatar
mhuss
Site Admin
Posts: 1440
Joined: Thu Nov 15, 2007 5:40 am

Re: Introduce yourself

Post by mhuss »

Welcome, Jürgen!

--mark
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: Introduce yourself

Post by Dr.HI-TONE »

Hi Jurgen,
Welcome!
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
Dad3353
Posts: 55
Joined: Thu Jun 03, 2010 7:06 pm
Location: France

Re: Introduce yourself

Post by Dad3353 »

Good afternoon, Jürgen, and welcome to the forum...

Congratulations on having a '77 50w in, apparently, cleaner condition than the new ones we used to see in the shops at the time..! :D Do you have access to a time machine, or did you find the one last surviving New Old Stock DR501..? :roll: Has the amp been re-finished..? It looks splendid. 8)
Very nice.
Have a good day.

Dad3353 (Douglas...)
User avatar
bikehomero
Posts: 40
Joined: Fri Jan 25, 2013 8:16 pm

Re: Introduce yourself

Post by bikehomero »

Hi Dad,

i've got this amp few weeks ago. It had been waitig some years in a garage. Got it from my brother, he is car mechanic in Berlin. One of his longyear customers died last year an he was asked by the widow to take away everything from his garage. My brother is not a musican, but noticed some of the stuff could be interesting for me. He gave me the information that it is a VOX amp. As i visit my brother every year in december to check my car, we decided i should take a look and if i like the stuff i should take it with me. I was curious about what is waiting so i asked him for fotos. The fotos he sent to me are attached. I nearly got an heart attack as i saw the Hiwatt amp. As a fan from David Gilmour, it's the amp of my dreams. It had been stored with cover, so it doesn't look too bad. Cleaned it up with soap and a soft brush, then use ArmorAll for both the amp and the cabinet.

Now i'm looking for a hiwatt cabinet as well. My questions about this brougt me to this place.

Best regards

Jürgen
Attachments
IMG_0728_r.jpg
IMG_0728_r.jpg (169.17 KiB) Viewed 4617 times
IMG_0724_r.jpg
IMG_0724_r.jpg (177.42 KiB) Viewed 4617 times
Foto0778_r.jpg
Foto0778_r.jpg (160.95 KiB) Viewed 4617 times
Dad3353
Posts: 55
Joined: Thu Jun 03, 2010 7:06 pm
Location: France

Re: Introduce yourself

Post by Dad3353 »

The stuff of dreams, Jürgen, the stuff of dreams. Thanks for sharing the story. I should have listened to my parents and studied to become a mechanic..! :oops:
Have a good day.

Dad3353 (Douglas...)
Post Reply