Looking for 1975 Hiwatt 4x12 with Fane 125155

List your HIWATT / Fane equipment here. BUYER BEWARE! This site does not investigate / moderate / warranty any gear deals.

Moderator: Mods

Post Reply
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

Just thought I'd post this...I'm Looking for a Hiwatt 4x12 with 4 125155 speakers.... I have one from 1975 and it sounds incredible with my bass...there are NO labels on my speakers...just numbers....I think they are cast fames as well....I believe they are rated at 60 watts each...which is plenty for my 1970 DR103...I'm NOT sure what year they were made...I've seen a post on the web where one guy mentioned his cab was from 1978...Mine is a Hylight with the Black Grill, Marshall metal side handles...Thanks!
Baz Cooper
773-2Five Nine-6Nine2Six
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Dr.HI-TONE »

Hi Baz,
your cab should be from 1978 or 1979.
This would be the first 1975 cab with metal handles that I ever saw.
I have a pair of these cabs with consecutive serial numbers.
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

Doc,
The serial Number is 8128. Here are some pics of the emblem and side/front view. I'm using a 1970 DR103 through it with My 1965 Thunderbird II. The Tone is SICK. I prefer the slight breakup for my bass. This particular Speaker cab sounds Like a Monstrous Volcano about to erupt...Like a Tornado...I've never heard speakers like this...that's why I'd like to find another...
Attachments
photo 2.JPG
photo 2.JPG (126.84 KiB) Viewed 5742 times
photo 1.JPG
photo 1.JPG (150.54 KiB) Viewed 5742 times
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

Here are some more pics:

Did some Goon remove the Fane Burgundy Stickers????
Attachments
IMG_4794.jpg
IMG_4794.jpg (281.67 KiB) Viewed 5734 times
IMG_4793.jpg
IMG_4793.jpg (202.77 KiB) Viewed 5734 times
IMG_4792.jpg
IMG_4792.jpg (260.79 KiB) Viewed 5734 times
IMG_4791.jpg
IMG_4791.jpg (137.82 KiB) Viewed 5734 times
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by OldSchoolDave »

Baz Cooper wrote: Did some Goon remove the Fane Burgundy Stickers????
The stickers would have been applied to black plastic magnet covers - which are missing. It wasn't unusual for them to come loose after being bounced around for awhile. Probably were pulled out from the bottom of the cab to avoid rattling.

Dave

P.S. the "ugly duckling" cab I used to own had a quad of Fanes dated 28 and 29/78 with the speakers bearing both 125114 and (fainter) 125155 model codes. Must have been an interesting time at the Fane Factory... FWIW, the handles are the squatter plastic kind with the round cutout.
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

So do you think it's OK without those black Plastic covers???
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by OldSchoolDave »

Baz Cooper wrote:So do you think it's OK without those black Plastic covers???
Strictly cosmetic. I've seen some Celestions that have lost their covers as well. Some gluers were better than others, I guess.

Dave
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

Thanks!
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by mikhailwatt »

FYI - those are stamped frames, painted hammertone.

I had a similar cab - innards looked identical to yours, outside was very road-worn... S/N 8263 from 1978 - the old "SKIPPY" cab previously owned by the (late) leader of Seattle grunge band "GRUNTRUCK" - later sold back to the real "SKIPPY" in an odd-but-cool, cosmic turn of events.... it had 125155 Fanes, three were re-cones. It had a pretty good, aggressive tone, different than my earlier Fane-loaded cabs, but good nonetheless.

Michael
You can almost feel the current flowing
You can almost see the circuits blowing
Baz Cooper
Posts: 36
Joined: Fri Sep 24, 2010 3:51 am
Location: Orland Park, Illinois

Re: Looking for 1975 Hiwatt 4x12 with Fane 125155

Post by Baz Cooper »

Dr.HI-TONE wrote:Hi Baz,
your cab should be from 1978 or 1979.
This would be the first 1975 cab with metal handles that I ever saw.
I have a pair of these cabs with consecutive serial numbers.
Doc, IF...You ever want to part with them....Let Me Know.......
Baz
Post Reply