new to the fold...

Forum for pedal, guitar and off-topic discussions.

Moderator: Mods

User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

new to the fold...

Post by mikhailwatt »

1989 Gibson Howard Roberts Fusion
Image

This is one sweet guitar... thick Gibson tone and sustain for days, even unplugged. :D :D :D

A previous owner put a set of SD Phat Kat P90s in it, and changed out the OEM keystone tuners. A set of Smit's handwound PAF-style humbuckers are on order, and the tuners will be replaced with proper old-school keystones.
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: new to the fold...

Post by OldSchoolDave »

It's a beauty! I suppose you're busy getting your Steve Howe chops in order.

Out of curiosity, how thick is the body on the Howard Roberts?

Dave
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: new to the fold...

Post by mikhailwatt »

OldSchoolDave wrote:It's a beauty! I suppose you're busy getting your Steve Howe chops in order.

Out of curiosity, how thick is the body on the Howard Roberts?

Dave
Steve Howe? Not really... very different than an ES175 archtop.

This is my Alex Lifeson guitar... similar construction to a 335, but smaller (14 7/8") deeper (2 5/16") body. 3-piece maple neck + center block, ebony fingerboard.
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: new to the fold...

Post by Dr.HI-TONE »

NICE!
have you had a chance to crank up and get a feel for the phat cats? I wonder what you think of them.

Is that an ebony fretboard? (you must have replied just seconds before me :lol: )

Are you going A2, A4 or A5?

If you are going to the trouble to change the pups, you might get a RS prewired kit. Their super pots are nice!
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: new to the fold...

Post by Dr.HI-TONE »

http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: new to the fold...

Post by mikhailwatt »

Dr.HIWATT wrote:NICE!
have you had a chance to crank up and get a feel for the phat cats? I wonder what you think of them.

Are you going A2, A4 or A5?
The Phat Kats are ok... I could live with them if I had to, but I prefer a good Alnico 2 PAF.

Yes, I might as well go with the RS kit while I'm at it.
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: new to the fold...

Post by Dr.HI-TONE »

I would have to guess that A2 would be the best with the ebony board.

Can you keep Derek from taking it to Boston???

:lol:
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: new to the fold...

Post by mikhailwatt »

Dr.HIWATT wrote:Can you keep Derek from taking it to Boston???
No problem there... he got himself a new ES-359. :wink:
You can almost feel the current flowing
You can almost see the circuits blowing
User avatar
OldSchoolDave
Posts: 2060
Joined: Wed Nov 14, 2007 9:24 pm
Location: HP, NC USA
Contact:

Re: new to the fold...

Post by OldSchoolDave »

mikhailwatt wrote: This is my Alex Lifeson guitar... similar construction to a 335, but smaller (14 7/8") deeper (2 5/16") body. 3-piece maple neck + center block, ebony fingerboard.
Thanks for the info. My next guess would have been Nugent ;) .

Dave
...Hey! I played that song when it was new...

http://www.OldSchoolDave.com
User avatar
James Hart
Posts: 10
Joined: Sat May 16, 2009 6:43 pm
Location: toms_river.nj.us
Contact:

Re: new to the fold...

Post by James Hart »

very nice! I've been looking at Guild Starfire versions of that... slim bodied, semi-hollow, single cutaway. Same color hopefully too.
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: new to the fold...

Post by Dr.HI-TONE »

Sounds like the Snyder boy's had a successful hunting trip!

Tell Derek, "Congratulations!"
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
User avatar
lp59pete
Posts: 128
Joined: Thu Nov 15, 2007 2:57 am
Location: Indiana

Re: new to the fold...

Post by lp59pete »

Those are really nice guitars! Congrats.
User avatar
GigawattCustom121
Posts: 171
Joined: Fri Jan 16, 2009 1:21 am

Re: new to the fold...

Post by GigawattCustom121 »

Sweet
"The faster you play, the fewer woman will be at your shows" ~Scott Henderson
User avatar
Dr.HI-TONE
Site Admin
Posts: 2675
Joined: Wed Nov 14, 2007 8:51 pm
Location: HIWATT Valley

Re: new to the fold...

Post by Dr.HI-TONE »

How about some pics of the newest guitar to the fold?

8)
http://www.HI-TONE-Amps.com

HI-TONE, when only the best will do.

DR-F
User avatar
mikhailwatt
Posts: 858
Joined: Thu Nov 15, 2007 2:46 am
Location: Austin TX

Re: new to the fold...

Post by mikhailwatt »

Dr.HIWATT wrote:How about some pics of the newest guitar to the fold?

8)
All in good time... :wink:

The H. Roberts is in the middle of surgery.

The "newest" fold-member just got plugged in last night. Keeper. "She" was born 8/13/82, with two necks. :D
You can almost feel the current flowing
You can almost see the circuits blowing
Post Reply