"GUYS I MET ON THE INTERNET" Part Deux
Moderator: Mods
-
mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
"GUYS I MET ON THE INTERNET" Part Deux
I'll be "running the gauntlet" again this weekend... this time to pick up one of the very early PCB DR504 Hylights.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
-
OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: "GUYS I MET ON THE INTERNET" Part Deux
Safe travels! And, best of luck with the body cavity search .
Dave
.Dave
-
Dr.HI-TONE
- Site Admin
- Posts: 2675
- Joined: Wed Nov 14, 2007 8:51 pm
- Location: HIWATT Valley
Re: "GUYS I MET ON THE INTERNET" Part Deux
Congrats!
I think????
I think????
-
mikhailwatt
- Posts: 858
- Joined: Thu Nov 15, 2007 2:46 am
- Location: Austin TX
Re: "GUYS I MET ON THE INTERNET" Part Deux
No cavity searches, Interpol screenings or other issues... 
My son made the trip with me. And #14872 made it home safely.
Sounded good and HIWATT-ey when I tried it, though it does have a bit of the 2-holer "splatty" thing when dimed, and probably needs a Canadian de-mod. Pics and more later.
edit: just had to pull it out of the sleeve...
Tested 27/8/80. Everything looks original, except the filter caps and one output valve base (just replaced), the usual Canadian 120v and gain mods, and some cab & chassis mounting screws. And eight all-new E-H valves (including an AX7 in the PI)... soon to be replaced.
My son made the trip with me. And #14872 made it home safely.
Sounded good and HIWATT-ey when I tried it, though it does have a bit of the 2-holer "splatty" thing when dimed, and probably needs a Canadian de-mod. Pics and more later.
edit: just had to pull it out of the sleeve...
Tested 27/8/80. Everything looks original, except the filter caps and one output valve base (just replaced), the usual Canadian 120v and gain mods, and some cab & chassis mounting screws. And eight all-new E-H valves (including an AX7 in the PI)... soon to be replaced.
You can almost feel the current flowing
You can almost see the circuits blowing
You can almost see the circuits blowing
Re: "GUYS I MET ON THE INTERNET" Part Deux
They're still good for "smoke tests."mikhailwatt wrote:And eight all-new E-H valves (including an AX7 in the PI)... soon to be replaced.
Congrats on the new 'watt.
--mark
-
OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: "GUYS I MET ON THE INTERNET" Part Deux
Or....modern sculpturemhuss wrote:They're still good for "smoke tests."mikhailwatt wrote:And eight all-new E-H valves (including an AX7 in the PI)... soon to be replaced.
?Congrats on the succesful border run, mikhailwatt. That one's a mere 4 months "newer" than my PCB SA112.
Dave