SA212R Question
Moderator: Mods
SA212R Question
Hey guys, quick question. What is the ohms load for the SA212R's? Mine is a 1976 and it has nothing on the back saying. The reason I ask is because I recently picked up a pair of purple back 125155 Fanes. They are 16ohms each. What would be the best way to install them in said SA212R?
-
OldSchoolDave
- Posts: 2060
- Joined: Wed Nov 14, 2007 9:24 pm
- Location: HP, NC USA
- Contact:
Re: SA212R Question
Connect them in parallel.
The two leads coming out of the chassis of an SA212 are from the 8 ohm tap.
FYI, in order to facilitate future chassis renewal on my (former) SA212, I wired those leads to a Cliff Jack mounted on a fender washer in an unused power tube socket.
Cool amp you have! Not many Reverb models around.
Dave
The two leads coming out of the chassis of an SA212 are from the 8 ohm tap.
FYI, in order to facilitate future chassis renewal on my (former) SA212, I wired those leads to a Cliff Jack mounted on a fender washer in an unused power tube socket.
- SA212 Speaker Jack mod.jpg (160.94 KiB) Viewed 1092 times
Dave
Re: SA212R Question
Thank you so much Dave!
It is indeed a very cool amp. And now that i have an actual pair of purple back Fanes it's even cooler!
It is indeed a very cool amp. And now that i have an actual pair of purple back Fanes it's even cooler!